HOME Forums Gateways EZSrve Version 2.04 – now no response from EZServe Reply To: Version 2.04 – now no response from EZServe

Post count: 39

When installing I had forgotten to remove my static address. Afterwards I did the following:

Please recover by resetting the unit. This is done by powering down, then pushing the side reset button 4-6 seconds into the boot-up process and holding the button until both LEDs in the ethernet socket light up. Then let go. The unit will boot again after clearing the flash.

I actually did the resetting 3 times before the unit corrected itself. I then used the discovery tool and reinstalled 2.04. Everything needed to be reloaded, but function is good.