Does the 1.1 Discovery tool show EZSrve and at 02.03? I’ll do some research and testing to see if there is away to set the password through the XML interface. Do you have the SHN Utility installed and if so can you connect to the EZSrve. The 1.81 level of the Utility cannot do functional things to Insteon devices but you should be able to “Connect”. The XML can be issued through the Control tab which may give an option to set the password to something known. The Utility lower left message will still say Not Connected as that message is overlaid with the level of the EZSrve which has a different format in V2 but the lower right message should say Connected to EZBridge.
Reply To: 2.x upgrade challenges (2x) grif091 2017-12-21T22:33:21+00:00