Try issuing this command through the SHN Utility EZSrve/EZBridge Control tab to start Program 1. The 1.81 version of the Utility will work for this.
Change AA.BB.CC to the Insteon address of the EZFlora. Using a Cmd1=”40″ turns on valve 1.
Can’t get utility V1.81 to connect to EZRain unit – insteon messages time out or utility crashes. But EZServe can control it ie I can manually turn on values etc.
Also the traffic log shows no traffic when EZServe web interface turns on a valve – I know it’s turning the value on because the sprinkler is dispensing water over my lawn. Is V1.81 compatible with V2.01 EZServe?