Mark, you should be seeing two messages from the KPL. The one you mentioned with a “to” address of 00 00 03 is the Group Broadcast message for Group 3 (button C) from the KPL which is not directed to any specific device. You should be seeing a second message with a “to” address of the EZSrve which as I type this may not be traced by HL2 because that message (Group Broadcast Direct) is not addressed to the HL2 PLM. I’ll set up a test tonight with one of my KPLs and see if I get an xml message from a button 3 press. I’ll also test an Action trigger from the same KPL button. Maybe the button press is being received, just not generating an xml message.
Reply To: 2.0: how to monitor device events? 2017-12-21T19:42:44+00:00