Reply To: EZX10RF Repeats transmissions 2017-12-21T14:50:55+00:00

HOME Forums Controllers EZX10RF EZX10RF Repeats transmissions Reply To: EZX10RF Repeats transmissions

Anonymous
Post count: 7

Thanks for the feedback. I’ve done some more testing, but first I’ll answer your questions as best I can.

First let me make some assumptions which you should agree or disagree with.
This is happening only with the EZX10RF.

Correct.

No other devices show multiple Group Broadcast messages being issued.

Correct.

The same sequence was observed from two different EZX10RF devices.

Correct. The two more recent EZX10RF’s show this behavior. My original one did not (but it had the lockup feature). I don’t know how Insteon addresses are assigned. The two devices that work the same have addresses of 01.7E.DB and 01.7E.D0. Does that imply they were from the same batch? The original one was 06.4E.07.

If these assumptions are true then either two different EZX10RF devices have the same trait or there is some other variable involved. Is there more than one wireless X10 device producing the same results?

Yes. I get the same result with an X-10 Keypad remote, a Key chain remote, and a motion detector.

What happens if you send the same X10 code directly over the powerline (no wireless)?

Nothing. There is no response from the EZX10RF when I send the same X-10 On command over the wire.

Here are some other samples. The first 3 are X-10 wireless, picked up by the EZX10RF.

In this one, E.0.66 is an OutletLinc linked as a direct responder (no ISY program involved, although the PLM is linked, too)
2009/06/03 17:57:32 : [INST-SRX ] 02 50 01.7E.DB 00.00.04 CB 11 00 LTONRR (00)
2009/06/03 17:57:32 : [Standard-Group][01.7E.DB–>Group=4] Max Hops=3, Hops Left=2
2009/06/03 17:57:32 : [ 1 7E DB 4] DON 0
2009/06/03 17:57:32 : [ E 0 66 1] ST 255
2009/06/03 17:57:32 : [ 1 7E DB 4] ST 255
2009/06/03 17:57:32 : [INST-SRX ] 02 50 01.7E.DB 00.00.04 CB 11 00 LTONRR (00)
2009/06/03 17:57:32 : [Standard-Group][01.7E.DB–>Group=4] Max Hops=3, Hops Left=2
2009/06/03 17:57:32 : [ 1 7E DB 4] DON 0
2009/06/03 17:57:32 : [INST-SRX ] 02 50 01.7E.DB 00.00.04 CB 11 00 LTONRR (00)
2009/06/03 17:57:32 : [Standard-Group][01.7E.DB–>Group=4] Max Hops=3, Hops Left=2
2009/06/03 17:57:32 : [ 1 7E DB 4] DON 0
2009/06/03 17:57:33 : [INST-SRX ] 02 50 01.7E.DB 00.00.04 CB 11 00 LTONRR (00)
2009/06/03 17:57:33 : [Standard-Group][01.7E.DB–>Group=4] Max Hops=3, Hops Left=2
2009/06/03 17:57:33 : [ 1 7E DB 4] DON 0
2009/06/03 17:57:33 : [INST-SRX ] 02 50 01.7E.DB 00.00.04 CB 11 00 LTONRR (00)
2009/06/03 17:57:33 : [Standard-Group][01.7E.DB–>Group=4] Max Hops=3, Hops Left=2
2009/06/03 17:57:33 : [ 1 7E DB 4] DON 0
2009/06/03 17:57:33 : [INST-SRX ] 02 50 01.7E.DB 0D.FD.22 41 11 04 LTONRR (04)
2009/06/03 17:57:33 : [Standard-Cleanup][01.7E.DB–>ISY/PLM Group=4] Max Hops=1, Hops Left=0

In this one, there is no responder (although the PLM is linked in)
2009/06/03 17:59:15 : [INST-SRX ] 02 50 01.7E.DB 00.00.05 CB 11 00 LTONRR (00)
2009/06/03 17:59:15 : [Standard-Group][01.7E.DB–>Group=5] Max Hops=3, Hops Left=2
2009/06/03 17:59:15 : [ 1 7E DB 5] DON 0
2009/06/03 17:59:15 : [ 1 7E DB 5] ST 255
2009/06/03 17:59:16 : [INST-SRX ] 02 50 01.7E.DB 00.00.05 CB 11 00 LTONRR (00)
2009/06/03 17:59:16 : [Standard-Group][01.7E.DB–>Group=5] Max Hops=3, Hops Left=2
2009/06/03 17:59:16 : [ 1 7E DB 5] DON 0
2009/06/03 17:59:16 : [INST-SRX ] 02 50 01.7E.DB 00.00.05 CB 11 00 LTONRR (00)
2009/06/03 17:59:16 : [Standard-Group][01.7E.DB–>Group=5] Max Hops=3, Hops Left=2
2009/06/03 17:59:16 : [ 1 7E DB 5] DON 0
2009/06/03 17:59:16 : [INST-SRX ] 02 50 01.7E.DB 00.00.05 CB 11 00 LTONRR (00)
2009/06/03 17:59:16 : [Standard-Group][01.7E.DB–>Group=5] Max Hops=3, Hops Left=2
2009/06/03 17:59:16 : [ 1 7E DB 5] DON 0
2009/06/03 17:59:17 : [INST-SRX ] 02 50 01.7E.DB 00.00.05 CB 11 00 LTONRR (00)
2009/06/03 17:59:17 : [Standard-Group][01.7E.DB–>Group=5] Max Hops=3, Hops Left=2
2009/06/03 17:59:17 : [ 1 7E DB 5] DON 0
2009/06/03 17:59:17 : [INST-SRX ] 02 50 01.7E.DB 0D.FD.22 41 11 05 LTONRR (05)
2009/06/03 17:59:17 : [Standard-Cleanup][01.7E.DB–>ISY/PLM Group=5] Max Hops=1, Hops Left=0

In this one, the X-10 message came from a motion sensor. (The first two were keypads.)
2009/06/03 17:59:31 : [INST-SRX ] 02 50 01.7E.DB 00.00.01 CB 11 00 LTONRR (00)
2009/06/03 17:59:31 : [Standard-Group][01.7E.DB–>Group=1] Max Hops=3, Hops Left=2
2009/06/03 17:59:31 : [ 1 7E DB 1] DON 0
2009/06/03 17:59:31 : [ 1 7E DB 1] ST 255
2009/06/03 17:59:32 : [INST-SRX ] 02 50 01.7E.DB 00.00.01 CB 11 00 LTONRR (00)
2009/06/03 17:59:32 : [Standard-Group][01.7E.DB–>Group=1] Max Hops=3, Hops Left=2
2009/06/03 17:59:32 : [ 1 7E DB 1] DON 0
2009/06/03 17:59:32 : [INST-SRX ] 02 50 01.7E.DB 00.00.01 CB 11 00 LTONRR (00)
2009/06/03 17:59:32 : [Standard-Group][01.7E.DB–>Group=1] Max Hops=3, Hops Left=2
2009/06/03 17:59:32 : [ 1 7E DB 1] DON 0
2009/06/03 17:59:32 : [INST-SRX ] 02 50 01.7E.DB 00.00.01 CB 11 00 LTONRR (00)
2009/06/03 17:59:32 : [Standard-Group][01.7E.DB–>Group=1] Max Hops=3, Hops Left=2
2009/06/03 17:59:32 : [ 1 7E DB 1] DON 0
2009/06/03 17:59:33 : [INST-SRX ] 02 50 01.7E.DB 00.00.01 CB 11 00 LTONRR (00)
2009/06/03 17:59:33 : [Standard-Group][01.7E.DB–>Group=1] Max Hops=3, Hops Left=2
2009/06/03 17:59:33 : [ 1 7E DB 1] DON 0
2009/06/03 17:59:33 : [INST-SRX ] 02 50 01.7E.DB 0D.FD.22 41 11 01 LTONRR (01)
2009/06/03 17:59:33 : [Standard-Cleanup][01.7E.DB–>ISY/PLM Group=1] Max Hops=1, Hops Left=0

In this last example, the EZX10RF is not involved at all. The controller is an Insteon keypad and the responder is the same OutletLinc from the first example. There is no repetition of commands.
2009/06/03 18:14:11 : [INST-SRX ] 02 50 0B.4A.DF 00.00.08 CB 11 00 LTONRR (00)
2009/06/03 18:14:11 : [Standard-Group][0B.4A.DF–>Group=8] Max Hops=3, Hops Left=2
2009/06/03 18:14:11 : [ B 4A DF 8] DON 0
2009/06/03 18:14:11 : [ E 0 66 1] ST 255
2009/06/03 18:14:11 : [ B 4A DF 8] ST 255
2009/06/03 18:14:11 : [INST-SRX ] 02 50 0B.4A.DF 0D.FD.22 41 11 08 LTONRR (08)
2009/06/03 18:14:11 : [Standard-Cleanup][0B.4A.DF–>ISY/PLM Group=8] Max Hops=1, Hops Left=0

Regards,
–Rich