You might try the hardware reset procedure. Unplug the EZIO8T, hold the Set button while plugging the device in. I think it is a 10 second hold but check the quick start guide. The fact that you cannot link along with all the other symptoms suggests maybe a communication problem. Try moving the EZIO8T closer to the computer and see if you can get the Config Reg results you are looking for. My EZIO8T is packed away (replaced by an EZIO2X4 years ago). I’ll dig it out and see how the register and output timer values work on mine. It was installed in a detached garage originally controlling and monitoring garage door operation so I assume I was able to set the needed values at the time. I’ll post back tonight after running some tests.
Reply To: EZIO8T outputs turn off by themselves. grif091 2017-12-21T17:17:54+00:00