HOME › Forums › Input/Output › EZIOxx › SeymourAV Screen Control w/Insteon & EZIO2x4 › Reply To: SeymourAV Screen Control w/Insteon & EZIO2x4
Anonymous
May 1, 2009 at 6:40 pm
Post count: 1001
To verify you have good Insteon communication with the EZIO2X4 at its final plug point, plug a good 3 wire extension cord into the receptacle where the EZIO2X4 will be finally plugged, plugging the EZIO2X4 into the other end of the extension cord. This should get the EZIO2X4 in a location where you can hear the relays and you do not want the motor wires connected anyway. There is no need to program it there. The device does not lose the configuration when power is removed.