Reply To: Cannot get EZFlora to register with EZSrve

[Anonymous]

#42586

I am able to connect to EzBridge from shn now…I needed password entered which I set on EZSrve after install…my bad there.

I just got reflashed unit back yesterday…unit is in wiring closet at moment and I’m away at moment. It must be latest.

All 4 insteon lights are SwitchLinc 600W dimmers. 2 could be discovered and 2 couldn’t. One that couldn’t be discovered is in same wallgang as one that could.

I moved EzBridge down into closet earlier and replugged in EzFlora. This time (5th time unplugging ezflora) I could link them. But this created like twenty of the following links in EzFlora:

Controller of FF.FF.FF on Unit FF – Data:FF-FF-FF

I’m deleting all but one of them.

Why is link deletion so painful? It takes 60 seconds to delete a link.

I get tons of the following messages (in simplehomenet) when trying to these extra delete ezflora links:

from ID:01.74.39 flags:2B cmd1:2B cmd2:FF
from ID:01.74.39 flags:2B cmd1:28 cmd2:3F
from ID:01.74.39 flags:2B cmd1:2B cmd2:2
from ID:01.74.39 flags:2B cmd1:2B cmd2:FF
from ID:01.74.39 flags:2B cmd1:2B cmd2:FF
…