Reply To: Where is the EzFlora xml command reference? 2017-12-21T17:46:37+00:00

HOME Forums Irrigation EZFlora Where is the EzFlora xml command reference? Reply To: Where is the EzFlora xml command reference?

Anonymous
Post count: 1001

The EZFlora commands are listed in the “Irrigation Controller Command Set” document in the Downloads section of the SHN web site.

Cmd1 0x40 – turns on a valve – cmd2 0x00-0x07 specifies the valve number 1-8
Cmd1 0x41 – turns off a valve – cmd2 0x00-0x07 specifies the valve number 1-8

An example of the XML to send an Insteon command to turn on valve 1 follows:

SndIns
AA
BB
CC
0F
40
00

I do not have an EZFlora to confirm this is a working example but I think it is correct. I took the SndIns template from the SHN Utility Control tab. The AA,BB,CC is the Insteon device address of the EZFlora. Parameter 5 is cmd1, parameter 6 is cmd2.