Reply To: Timers 2017-12-22T04:59:13+00:00

HOME Forums Gateways EZSrve Timers Reply To: Timers

Anonymous
Post count: 37

Hopefully, this is educating all of us…. I went to the EZServe/EZBridge tab and the Control subtab of the SHU. I had defined 2 macros associated with the ICON KPL Linc. Both are to implement a delay of 15 seconds and then send an OFF command to the device (OFF KPL).

The first macro, which I just deleted, look for “Upon ON” of the OFF KPL, delay 15 seconds and then turn OFF KPL OFF. It worked fine whenever I turned ON this device from the Simple Home web control page. I deleted this macro and confirmed that this no longer worked which was as expected.

I just now used the SH Web Page to turn on the device. The following traffic then showed up in the EZServe/EZBridge Control window:

InsStdMsg
0X2
0X50
0X5
0X16
0X88
0X6
0X4C
0X94
0X2B
0X7F
0XFF

SndIns
0X2
0X62
0X5
0X16
0X88
0XF
0X19
0X00
0X6

InsStdMsg
0X2
0X50
0X5
0X16
0X88
0X6
0X4C
0X94
0X23
0X11
0XFF

SndIns
0X2
0X62
0X5
0X16
0X88
0XF
0X11
0XFF
0X6

============================================================

It would be helpful to understand what is going on here and also where to find documentation of this at this level of detail.

I’ll make another posting for my next test…