Reply To: Timers 2017-12-22T09:30:44+00:00

HOME Forums Gateways EZSrve Timers Reply To: Timers

Anonymous
Post count: 1001

Use EZSrve Scenes Management to create a Scene (link) between the KeypadLinc as the Controller and EZSrve as the Responder. The Unit number specified when the KPL is added as the Controller of the Scene is the button number (1-8) assuming you are using the KPL in 8 button mode. Creating this Scene will write a “Controller of” link record in the KPL and a “Responder to” link record in EZSrve. To write the “Responder to” link record in EZSrve using the SHN Utility requires the Utility be connected to the powerline with a PLC.

The Macro If Device: Does: field is set to 11xx where xx is the button number of the KPL to trigger for an ON command (1104 for button 4 ON trigger). A value of 13xx where xx is the button number of the KPL to trigger for an OFF command (1302 for button 2 OFF trigger). The process of entering the 4 Hex digits in the Does: field was added in 1.57 and is written up in the EZSrve Operating Guide posted on the Downloads section of the SHN web site.