Reply To: EZSrve Image 1.58 Supports Macro Trigger On Group Number 2017-12-21T14:55:24+00:00

HOME Forums Gateways EZSrve EZSrve Image 1.58 Supports Macro Trigger On Group Number Reply To: EZSrve Image 1.58 Supports Macro Trigger On Group Number

Anonymous
Post count: 29

I downloaded the image, updated to 1.58, and figured out how to make the commands after pressing delete. On the first test it seemed to work, but then did not work at all. Then I noticed that none of my macros were working- I can see the Insteon commands appearing in the control window of the SHN utility, but no response for macros that have been working just fine (about 30 of them). So, I tried several things- unplugged the plm/cable, reset the ezserve, re-imaged the firmware…..still nothing. My next step was to try going back to the 1.57 image to see if that cured it, but then realized I had overwritten that file on the download. I have an older version (1.56 maybe) that I can try- any other suggestions?