The EZSrve 1.58 Image has expanded on the 1.57 enhancements such that Macros can be defined to trigger on a specific Group/Button number. Image 1.57 added the ability to enter a 4 digit hex number in a Timer Command: field and Macro Does: fields. The 4 digit hex number represents cmd1 and cmd2 values. This allows a Timer/Macro to issue an ON to a specific Bright level (1180) for example. Image 1.58 expands on this feature to allow the cmd2 value in the Macro If Does: field to represent a specific Group/Button number. An “If Device: KPL1 Does: 1103″ statement causes the Macro to fire only when an ON command from KPL1 button 3 is received by EZSrve. An “If Device: KPL1 Does: 1203” statement causes the Macro to fire only when a double tap Fast ON command from KPL1 button 3 is received. An “If Device: KPL1 Does: 1303” statement causes the Macro to fire only when an OFF command from KPL1 button 3 is received. This new capability applies to all the devices that supply a Group number on an inbound Group command sequence. This allows a Macro to trigger on a specific Virtual Input Group number from an EZSnsRF or EZX10RF, or a specific Input Group number from one of the EZIOxx family of devices.
Reply To: fw 1.57 setting macro for EZSnsRF 2017-12-21T22:33:36+00:00