Reply To: trying to get EZIO2X4 to Control Somfy Drapery controller 2017-12-21T20:07:29+00:00

HOME Forums Input/Output EZIOxx trying to get EZIO2X4 to Control Somfy Drapery controller Reply To: trying to get EZIO2X4 to Control Somfy Drapery controller

Anonymous
Post count: 26

@grif091 wrote:

I have not found what I am looking for yet, there is a lot of old stuff out there and I am still looking. However, I just realized what you posted for firmware level. You are seeing Connected v14, not a sticker on the device that says 14. Firmware level v14 is pretty old. I have three 2X4s that are at least 6 months old; probably more and they are v25. If your EZIO2X4 was a recent purchase, you should contact that supplier and get a newer unit. A new unit won’t have any effect on the erroneous messages from the PLC but it would probably resolve the loss of Timer values written by a successful Write.

I bought my ezio2x4 a little over a year ago from smarthome. Is there any way to update the software without mailing the thing to someone?