Reply To: trying to get EZIO2X4 to Control Somfy Drapery controller 2017-12-21T22:52:55+00:00

HOME Forums Input/Output EZIOxx trying to get EZIO2X4 to Control Somfy Drapery controller Reply To: trying to get EZIO2X4 to Control Somfy Drapery controller

Anonymous
Post count: 1001

GaryFunk response is right on. Same situation where the EZIO2X4 is used to open/close garage doors as they require a momentary circuit. Each EZIO2X4 Output has an Output timer value that can be set using the Simplehomenet Utility Suite (free download). Use the EZIOxx tab, Read the Output Timer values, using the up/down arrows, set the particular Timer to the value needed (2-3 seconds is generally all that is needed), Write the Output Timer values. In the Configuration Register area click on Read, check Set Timers in Seconds and Enable Output Timers, click on Write. Then click yellow Save Changes to make Configuration Register change permanent. Now the respective Output will turn OFF n seconds after being turned on.