Reply To: trying to get EZIO2X4 to Control Somfy Drapery controller 2017-12-21T22:52:55+00:00

HOME Forums Input/Output EZIOxx trying to get EZIO2X4 to Control Somfy Drapery controller Reply To: trying to get EZIO2X4 to Control Somfy Drapery controller

Anonymous
Post count: 5

@someguy wrote:

The somfy device needs a momentary contact to start the drapery controller to open or close the drapes (or stop the drapes while they are in motion).

The ezio2x4 makes a sustained contact, so the only way that I’ve been able to use it is by always pressing “off” on the controlling switch before I press “on” (or pressing off after each “on”).

Any better ways to make it work?

What is the maximum length of the momentary contact that the somfy will allow?

How about using the timers on the relays so they can turn off at a preset time after an On command is received .

It can be done. Read the documentation on the unit.