HOME › Forums › Irrigation › EZFlora › EZRain – Zone 8 keeps defaulting to Pump after a while… › Reply To: EZRain – Zone 8 keeps defaulting to Pump after a while…
Anonymous
September 22, 2008 at 6:27 pm
Post count: 1001
Try swapping the valve wires at the EZFlora between zone 8 and one of the other zone valves. Preferably swapping with a zone that is not in the same low voltage cable run as zone 8, if that is possible. When I first installed my system I had a intermittent short between wires in one of the low voltage cable runs that resulted in two zones running at once, some times. I originally thought I had a controller problem until a new controller produced the same results.