HOME › Forums › Irrigation › EZFlora › Status / Linking issues › Reply To: Status / Linking issues
Inactive
September 21, 2008 at 3:00 pm
Post count: 2
When use the Manage Device Links of the SHN Utility to display the links on the EZFlora, there are only two responder links:
One for the PLM of the ISY with group = 12
One for the PLC with group = 6
The PLC link was one I created manually.
I’m not seeing any Insteon traffic in the SDM’s log or in the ISY’s log when I try the diagnostics or when I run a program.
The program I started last night (1 minute per zone) has not yet finished 10 hours later.