For someone following this topic looking for functional information, the ON command energizes the output relay; the OFF command deenergizes the output relay. Somewhat like the X10 device that was mentioned, each output relay has an optional timer that can be set to turn the relay off after a preset increment measured in seconds or minutes. ie. I send an ON command to an EZIO2X4 output relay to energize a garage door opener. I set the associated output relay timer to 3 seconds so the relay turns off after a 3 second interval.
Reply To: ‘Open Relay’ Command grif091 2017-12-21T15:07:16+00:00