HOME › Forums › General › Feedback to Smartenit › Get Seneor Value Command › Reply To: Get Seneor Value Command
Inactive
May 9, 2008 at 6:59 am
Post count: 256
Analog channels can be read by peeking at locations 0x4c an 0x4d (10 bits) for An1 and 0x4e and 0x4f for An2. The 1-Wire data is at location 0x50. The read sensor always reads the 1-wire data (8 bits). See the Advance Detals and Command Set document.
Al