The later versions of the EZIO2X4 stay in linking mode after a successful link. This was an enhancement to the linking process to avoid having to repeat the 10 second hold, input taps, etc sequence when you were linking multiple devices to the same input. With this enhancement you have to do one final 4 second press to close out linking mode. Don’t know if this feature has made its way into the 6I devices. Pull up the quick start guide for the EZIO2X4 from the download section for a description of the added 4 second press to close out linking mode. This may be why the ISY folks talked about an extra 4 second press.
Reply To: Can’t seem to link EZIO6I to anything grif091 2017-12-22T04:21:20+00:00