Reply To: Macro Help: EZX10RF to EZServe – can’t get EZServe to see ev 2017-12-22T01:15:40+00:00

HOME Forums Gateways EZSrve Macro Help: EZX10RF to EZServe – can’t get EZServe to see ev Reply To: Macro Help: EZX10RF to EZServe – can’t get EZServe to see ev

Anonymous
Post count: 408

The Smarthome PLM has a mode called monitoring mode. While this mode was originally designed to monitor ALL Insteon traffic with which the PLM has a link too, it does not actually monitor the traffic very well that it does not initiate.

SO, this means that macros will only trigger if the event originated from the EZSrve. We are working with Smarthome to resolve the issue with the PLM, currently all monitoring systems using the PLM experience this problem.

In the meantime, will the following workaround work for you?

The ability to set the EZSrve to actively poll the status of a device every 30 seconds to minute or so, and then act. This would mean that the motion sensor triggers, and it may be 30 secs to 1 minute before the event occurs. We have been thinking of implementing this as a workaround until we have a resolution with Smarthome – depending on the need.