My EZServe is still having issues polling ApplianceLincs and ICON Appliance modules. Control isn’t an issue (most of the time except for one problematic location in my kitchen).
However, most times after the polling popup has disappeared, the results show are not right. Right now 5 of the 6 devices show off although all are on.
Does EZServe do the same to pool as the XML in EZbridge:
This code seems to always return the correct value (0x00 for off, 0xff for on) for all of my devices.
It also seems like when I have SHN running the web GUI seems to return better (i.e. more accurate) values for the devices.
I just noticed – in SHN in the “Data Received” window on the EZBridge Control tab – should I see polling commands sent to each device in the current area when I hit the “Get Area Status” button?
I’m seeing what looks like one command that has more bytes than the docs indicate for the SndIns command:
or is this just the EZBridge ACKing the command? (not sure what the leading 0x02, 0x62 are but the trailing 0x06 is the ACK, yes?)
I see two of the 6 devices being polled this way…???