Sorry it’s taken me so long to clarify this.
EZSrve defaults to link as a Controller, that is, when devices are linked to it with the electronic or pushbutton method, a controller link will be written in the EZSrve PLM, and a corresponding responder link will be written in the responder. Thus, it is possible to link buttons 2-8 of a keypadlinc, just as it is possible to link relays 1-8 in an EZIO8SA, or relays 1-4 in an EZIO4O. The method is as described in the user guide for most INSTEON devices. Simply go to add a device, select a new group, enter a name (such as KPL button 3) and hit “save”. Then, when prompted to add a record in the PLM, say yes. The EZSrve goes into linking mode. Then press the corresponding button on the KPL you want linked for about 6 seconds (the main button lights up or flashes). The EZSrve will say that it found a device and complete the linking. What just happened, is that a device was added (the particular button on the KPL) that can now be controlled like any other device.
Reply To: Can EZServe to control Keypadlinc (KPL) buttons?2017-12-21T22:36:55-08:00