HOME › Forums › Gateways › EZSrve › EZServe (V1.3) – help with keypadlinc › Reply To: EZServe (V1.3) – help with keypadlinc
Inactive
March 22, 2008 at 3:53 am
Post count: 84
Works very well. For other users – following linking instructions in other thread. Once the KPL buttons are all linked then setup two macros one that toggles the button on when the desired load is turned on and another macro that does the same when the desired is turned off.
Now when my timers run and turn on my son’s room space heater the KPL button status also updates!