Please refer to the section on linking the EZIO2X4 as a responder. You can link to a controller such as the ControlLinc, KeypadLinc or SwitchLinc. Place the controller in linking mode, then press the set-button on the EZIO2X4 for 4 seconds. The LED on the controller will stop flashing and the LED on the EZIO2X4 will turn off. Now you tell the EZIO2X4 which output you are linking by tapping on the set-button once for output 1 or twice for output 2. Then finish the process by pressing the set-button on the EZIO2X4 for 4 seconds. The LED will turn on and remain on again.
Reply To: EZIO2x4 Garage Door Control simplehome 2017-12-22T04:32:41+00:00