Reply To: simplehomenet utility will not change stored settings 2017-12-21T23:13:31+00:00

HOME Forums Input/Output EZIOxx simplehomenet utility will not change stored settings Reply To: simplehomenet utility will not change stored settings

Anonymous
Post count: 15

Paul, the setting of insteon commands for the inputs appears to work fine.

Now I have a major stabillity issue even if I make no changes to the state of the inputs I get all inputs on or all inputs off whenever I request their state via your software. (below is the log of communications)

I tried putting all the inputs + and – to ground except I1 to make sure it wasn’t a floating issue but the problem remains there, it seems to be more stable when I1 is on (+12v applied to I1+) but it goes bezerk when I1 is off…

2007-11-01 06:28:46.625: sendinsteonraw=True
2007-11-01 06:28:47.031: eventraw=04
2007-11-01 06:28:47.078: receiveinsteonraw=04 08 21 10 07 FC D5 2F 49 00
2007-11-01 06:28:47.093: eventraw=03
2007-11-01 06:28:47.109: eventraw=03
2007-11-01 06:28:47.203: eventraw=03
2007-11-01 06:28:49.328: sentinsteon=00 00 00 08 21 10 0F 49 00
2007-11-01 06:28:49.625: sendinsteonraw=True
2007-11-01 06:28:49.937: eventraw=04
2007-11-01 06:28:50.093: receiveinsteonraw=04 08 21 10 07 FC D5 2F 49 FF
2007-11-01 06:28:50.109: eventraw=03
2007-11-01 06:28:50.109: eventraw=03
2007-11-01 06:28:50.125: eventraw=03
2007-11-01 06:28:53.156: sentinsteon=00 00 00 08 21 10 0F 49 00
2007-11-01 06:28:53.359: sendinsteonraw=True
2007-11-01 06:28:53.578: eventraw=03
2007-11-01 06:28:53.781: eventraw=04
2007-11-01 06:28:53.843: receiveinsteonraw=04 08 21 10 07 FC D5 2F 49 00
2007-11-01 06:28:53.859: eventraw=03
2007-11-01 06:28:53.875: eventraw=03
2007-11-01 06:28:54.000: eventraw=03
2007-11-01 06:28:56.625: sentinsteon=00 00 00 08 21 10 0F 49 00
2007-11-01 06:28:56.937: sendinsteonraw=True
2007-11-01 06:28:57.250: eventraw=04
2007-11-01 06:28:57.406: receiveinsteonraw=04 08 21 10 07 FC D5 2F 49 FF

Regards

Dan