HOME › Forums › Input/Output › EZIOxx › Garage door opener connected to EZIO2X4 relay doesn’t work › Reply To: Garage door opener connected to EZIO2X4 relay doesn’t work
This is not supposed to happen and we will investigate.
Thank you for looking into this. I appreciate it and eagerly await your response.
I ran into the same problem; After hooking up a gate switch to output 1, inputs 3 and 4 started toggling. I solved this by connecting 10k pull up resistors between inputs 3 and 4 and 5v.
(Hooking a pull up only to input 3 causes input 4 to begin to toggle as well…)