HOME › Forums › Irrigation › EZFlora › Linking the EZRAIN to POWERLINC V2 USB › Reply To: Linking the EZRAIN to POWERLINC V2 USB
AnonymousInactive
May 15, 2007 at 2:56 am
Post count: 408
There is a typo in the commands, try the following:
-press/hold the PowerLinc button for 10 seconds then release
-the PowerLinc button LED should now be blinking
-press/hold the EZRain button for at least 3 seconds, the LED on the PowerLinc should now be solid, verifying the link was made