Reply To: Command set doc ?

[Anonymous May 14, 2007 at 5:15 pm Post count: 18]

#40717

@pauln wrote:

There is not a doc available yet. I will get one posted shortly (1-2 weeks). If you have some specific questions in the meantime, please feel free to email (paul@simplehomenet.com).

Also, using the quickstart guide, it is not necessary to use insteon commands, you can configure the module to work.

Yes, but I am seeing some weird behavior.

I have a Dakota Alert WMT-3000 IR motion sensor.

If I set DIP switch 9 “off” (down) and switch 10 “on”, it appears that the nsRF is sending device on and off Insteon messages every time the device is triggered:

2007-05-02 07:28:39 Received INSTEON “EZSnsRF” on (button 2)
2007-05-02 07:28:41 Received INSTEON “EZSnsRF” off (button 2)

If I set DIP switch 9 “on” (up) and switch 10 “on”, it appears that the nsRF is only sending the device off messages when the device is triggered:

(I triggered the motion detector multiple times…)

2007-05-04 23:25:34 Received INSTEON “EZSnsRF” off (button 2)
2007-05-04 23:25:52 Received INSTEON “EZSnsRF” off (button 2)
2007-05-04 23:26:09 Received INSTEON “EZSnsRF” off (button 2)
2007-05-04 23:26:27 Received INSTEON “EZSnsRF” off (button 2)

Any ideas ?