I did not find the document Paul referenced but here is how to get to the SHN Utility function he was discussing. First, download and install the Simplehomenet Utility Suite. Invoke the SHN Utility and “Connect” either to a PLC or an EZSrve/EZBrige. Select the EZIOxx tab, the Inputs Settings and Monitor tab, EDIT: “on the right side of the screen, Select EZIO Model, and enter the Insteon ID”, in the Insteon All_Link Group Commands Setting section is the Transition Off to On and Transition On to Off command settings input fields. Specify the Input you are interested in changing and click on Read. This will prime the section fields with the current settings for that specific Input. Make the change Paul indicated and click on Write.
Reply To: Using EZIO8SA for "All Lights Off" Function grif091 2017-12-21T17:24:22+00:00