How to replace EZSrve?

The product has been discontinued

Moderator: Justin

dentar
Posts: 4
Joined: Fri Jun 12, 2015 12:44 pm

How to replace EZSrve?

Postby dentar » Mon Jun 15, 2015 9:52 am

I have a dead EZSrve here, but going through all the products, it looks like I'll need multiple pieces to replace that one piece. There are too many choices to make an educated decision...

All I want to do is turn on and off a few lamps connected to INSTEON plugs at a predetermined time (e.g. midnight and sunset minus thirty minutes.)

The EZSrve did that magnificently for a while, 'til it croaked.

It needs to be ETHERNET capable and programmable via a regular web browser, and cannot be dependent on platform (i.e. we're using a mac here, not Windows)

What do I get?

THANKS!

Justin
Moderator
Posts: 146
Joined: Thu Oct 29, 2009 3:34 pm

Re: How to replace EZSrve?

Postby Justin » Mon Jun 15, 2015 10:12 am

Hi there Dentar,

I'm sorry to hear about your EZSrve's passing on...

What it sounds like you should go with is an Harmony P2 with the EZIComm interface. The gateway alone only communicates with the supported ZigBee and Wifi devices, but with the EZIComm interface, you'll add INSTEON and X10 communication.

The processor and functionality is much better than the EZSrve and I'm sure you'll be happy with this gateway.

Let me know if you have any other questions.

Harmony P2 - http://smartenit.com/product/harmony-p2/

dentar
Posts: 4
Joined: Fri Jun 12, 2015 12:44 pm

Re: How to replace EZSrve?

Postby dentar » Mon Jun 15, 2015 12:11 pm

This has options... do I have to pick the 2414U thing or just the base unit and add the EZIcomm later.. and I assume I have to do the USB one?

Justin
Moderator
Posts: 146
Joined: Thu Oct 29, 2009 3:34 pm

Re: How to replace EZSrve?

Postby Justin » Mon Jun 15, 2015 12:24 pm

You'll want the option that is in the drop down list...the 2412U. (sorry, there's a typo on the website...not 2414U)

Justin
Moderator
Posts: 146
Joined: Thu Oct 29, 2009 3:34 pm

Re: How to replace EZSrve?

Postby Justin » Mon Jun 15, 2015 1:27 pm

Oh, and sorry for the confusion...the EZIComm is our PLM which is essentially the same as the 2412U. I meant to direct you to purchase the 2412U interface option.


Return to “EZSrve”

Who is online

Users browsing this forum: No registered users and 1 guest